Tools and Materials Needed: How To Remove Handle From Delta Bathroom Faucet
Before you start, make sure you have the right tools for the job. Having the right tools will make the process much easier and safer.
Required Tools
The following tools are essential for removing a Delta bathroom faucet handle:
- Phillips Screwdriver: This is used to remove the handle screw, which holds the handle in place. Look for a screwdriver with a size that matches the screw head on your faucet.
- Adjustable Wrench: This is used to loosen the faucet cartridge, which is located underneath the handle. It’s a versatile tool that can be adjusted to fit different sizes.
- Channel-Lock Pliers: These are useful for gripping and turning the cartridge if the adjustable wrench doesn’t provide enough grip.
- Small Flat-Head Screwdriver: This can be helpful for prying off the handle cap, which is often held in place by a small clip.
Alternatives
- Instead of an adjustable wrench, you can use a basin wrench, which is specifically designed for loosening faucet cartridges.
- If you don’t have channel-lock pliers, you can try using a pair of vice grips. However, these can be more difficult to control and may damage the cartridge if not used carefully.
Tools and Their Functions
Here’s a table summarizing the tools and their functions:
| Tool | Function |
|---|---|
| Phillips Screwdriver | Removing the handle screw |
| Adjustable Wrench | Loosening the faucet cartridge |
| Channel-Lock Pliers | Gripping and turning the cartridge |
| Small Flat-Head Screwdriver | Prying off the handle cap |
Removing the Handle
Now that you’ve gathered your tools and materials, you’re ready to remove the handle from your Delta bathroom faucet. This process is usually straightforward and can be done with basic tools.
Identifying and Accessing the Handle Screw or Retaining Clip, How to remove handle from delta bathroom faucet
The first step is to identify the handle screw or retaining clip. This is usually located under the handle, either in a small hole or a slot. You may need to use a small screwdriver or a tool to pry off a decorative cap to reveal the screw or clip.
- Handle Screw: This is a small screw that holds the handle in place. It can be located under the handle, in a small hole, or in a slot. To remove the screw, you will need a small Phillips head screwdriver.
- Retaining Clip: This is a small metal clip that holds the handle in place. It can be located under the handle, in a small slot. To remove the clip, you will need a small flathead screwdriver or a tool to pry it off.
Removing the Handle
Once you have identified and accessed the handle screw or retaining clip, you can proceed with removing the handle.
- Loosen the Screw or Clip: Using a small Phillips head screwdriver or a flathead screwdriver, loosen the handle screw or retaining clip. You may need to apply some pressure to break the screw loose.
- Remove the Handle: Once the screw or clip is loose, you can remove the handle by pulling it gently away from the faucet body. If the handle is stuck, you can try tapping it gently with a rubber mallet or a wooden block.
